Small video setup
Small video setup with an LED wall
Two Blackmagic studio cameras and a Panasonic PTZ feed a Barco E2 Gen 2 in the control room. Its outputs go to a HyperDeck recorder and to an SDI distribution amplifier, which feeds a stage monitor and, through an SDI to HDMI converter, the Novastar MCTRL4K processor that drives the LED wall. It is the “small video setup” of the editor’s start screen.
9 devices, 8 cables, 2 zones.
This setup is one of the three choices on the editor’s start screen.
The diagram
Families on this diagram
- Video
Zones
- Stage
- Video control
What the engine says
Every cable shown has already passed the same checks as the editor’s Checks tab — signal, connector, occupancy, budgets. A warning would show up here exactly as it would in the app; no warning showing up is itself a verdict from the engine, not silence.
No alerts.
Equipment list
Devices
| Qty | Brand | Model | Device |
|---|---|---|---|
| 2 | Blackmagic Design | Studio Camera 4K Pro | Camera 1 stage left, Camera 2 stage right |
| 1 | Barco | E2 Gen 2 | E2 Gen 2 |
| 1 | Novastar | MCTRL4K | MCTRL4K |
| 1 | Panasonic | AW-UE150 | PTZ wide |
| 1 | Blackmagic Design | HyperDeck Studio HD Plus | Recorder |
| 1 | Générique | Distributeur SDI 1 → 4 | SDI distribution 1 → 4 |
| 1 | Blackmagic Design | Micro Converter SDI vers HDMI 12G | SDI to HDMI converter |
| 1 | Générique | Écran de retour | Stage monitor |
Cables to prepare
| Qty | Signal | Connector | Length |
|---|---|---|---|
| 6 | SDI | BNC | — |
| 2 | HDMI | HDMI | — |
Cable list
| Label | Source | Destination | Signal | Source connector | Length |
|---|---|---|---|---|---|
| V01 | Camera 1 stage left · SDI OUT | E2 Gen 2 · SDI IN 1 | SDI | BNC | — |
| V02 | Camera 2 stage right · SDI OUT | E2 Gen 2 · SDI IN 2 | SDI | BNC | — |
| V03 | E2 Gen 2 · SDI OUT 1 | Recorder · SDI IN | SDI | BNC | — |
| V04 | E2 Gen 2 · SDI OUT 4 | SDI distribution 1 → 4 · SDI IN | SDI | BNC | — |
| V05 | PTZ wide · HDMI OUT | E2 Gen 2 · HDMI IN 1 | HDMI | HDMI | — |
| V06 | SDI distribution 1 → 4 · SDI OUT 3 | SDI to HDMI converter · SDI IN | SDI | BNC | — |
| V07 | SDI distribution 1 → 4 · SDI OUT 4 | Stage monitor · SDI IN | SDI | BNC | — |
| V08 | SDI to HDMI converter · HDMI OUT | MCTRL4K · HDMI IN | HDMI | HDMI | — |
Patch sheet: E2 Gen 2
The device with the most connected sockets. Every device on the diagram has its own sheet.
| Port | Signal | Connector | Cable label | Connected to |
|---|---|---|---|---|
| SDI IN 1 | SDI | BNC | V01 | Camera 1 stage left / SDI OUT |
| SDI IN 2 | SDI | BNC | V02 | Camera 2 stage right / SDI OUT |
| HDMI IN 1 | HDMI | HDMI | V05 | PTZ wide / HDMI OUT |
| SDI OUT 1 | SDI | BNC | V03 | Recorder / SDI IN |
| SDI OUT 4 | SDI | BNC | V04 | SDI distribution 1 → 4 / SDI IN |
Inputs · 38 free — Outputs · 17 free
The canvas is already open
Drop five devices, pull cables between their ports: the cable list, the patch sheet and the equipment list fill themselves in while you draw. No account, no card.